Elation 15R Specifications download pdf (Page 32)

Platinum Beam 15R™

©Elation Professional® Los Angeles Ca. 90040 www.ElationLighting.com

! Reset Others: This function will reset all other motors not associated with any in the

previously listed reset commands to the home position.

9.6 Effect Adjust:

9.6.1 Test Channel – This menu function allows the user to select each individual

fixture channel and test it’s function independently from the control board.

9.6.1 Lamp adjustment (manual control) – This function readies the fixture for lamp optimization

in a simple single step procedure. This function will center the pan and tilt motors and at

the same time open the shutter and bring the dimmer to 100%. The pan and tilt function

will still operate if the fixture needs to be positioned to a flat clear surface. For more

information on lamp optimization please see Section 6/Page 14.

9.6.2 Calibrate values – This function should only be performed by a qualified technician. This

function allows a user to make small adjustments to the effect wheels (color, gobo, shutter,

etc) to compensate for ware or in the event a sensor has been knocked slightly out of

place. Because improper use of this function can result in undesired operation this

function has been password protected. The password is 050 and must be entered each

time the calibration menu function is entered. Because calibration is an extremely delicate

procedure instruction on performing this action are left out of this manual. For a first time

calibrator, please contact our customer support team for step-by-step instructions.

9.7 User Mode Set:

9.7.1 User mode – This function allows the user to create user defined channel orders allowing

the fixture to match the channel order of other fixtures on the market for easier operation.

A total of three user modes may be configured: User Mode A, User Mode B, and User

Mode C.

9.7.2 Edit User mode – This function allows the user to make the actual changes in the

user-defined modes that are created in the previous function.

9.8 EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows

custom programs to be installed and recalled directly from the fixture’s control board.

Programs can be created and stored using the fixture’s control board or by using an

external DMX controller. For detailed instructions on how to complete this task please see

Section 12/ Page 39.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

No comments

Elation 15R Specifications Page 32