Elation 15R Specifications download pdf (Page 42)

Platinum Beam 15R™

©Elation Professional® Los Angeles Ca. 90040 www.ElationLighting.com

indicators on the both the fixture and the transmitter will stop flashing and

glow solid green. If the paring is unsuccessful repeat the process until the

paring is secured.

d) The fixture will store the pairing information inside a nondestructive memory

bank once a link is created between the fixture and a transmitter. The fixture

will remember the paired transmitter even if the fixture is turned off for

extended periods of time.

13.3 Clearing Transmitter Link:

1) Access the fixture’s main menu and toggle to Personality - Wireless DMX – Reset.

Select “Reset” to clear any existing link between the fixture and a transmitter. The

WDMX indictor on the fixture will turn solid red when the link is severed.

2) You may also clear the link from the transmitter. First, be sure the fixture(s) is

powered on, and then hold down the configuration button on the transmitter for as

least 5 seconds. This will automatically clear the link between the transmitter and

any fixture that is powered on. All WDMX indictors will glow solid red if the

procedure was successful.

13.4 WDMX Indicators:

1) Rapid flashing Red/Green: Synced to a transmitter.

2) Slow flashing Red/Green: Paired with a transmitter. Transmitter is not receiving a

DMX signal from a controller.

3) Solid Green: Paired with a transmitter and receiving DMX data.

4) Solid Red: Not paired with a transmitter.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

No comments

Elation 15R Specifications Page 42