Elation 15R Specifications Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Platinum Beam 15R™
©Elation Professional® Los Angeles Ca. 90040 www.ElationLighting.com
35
11. OPERATING MODES
Operating Modes: The Platinum Beam 15R™ can operate in six different modes. This
next section will detail the differences in the operating modes.
• Internal Program Mode (Master) - The fixture will chasing through the built-in
programs, sending a DMX control signal to all other fixtures connect via DMX cables
instruction for a synchronized light show.
• Internal Program Mode (Stand-alone) - The fixture will chase through the built-in
program. This feature is great for store front with custom logos, where as the logos need
to be displayed but the use of a controller is unwanted.
• Sound Control Mode (Stand-alone) - The fixture will react to sound, chasing through
the built-in programs. Great for small clubs or DJ that do not want to bother with
programming.
Sound Control Mode (Master/Slave) -You can daisy chain up to 16 fixtures together
to get a synchronized light show without the need of an external controller. The fixtures
will react to sound, chasing to a synchronized light show.
Set To Slave This function will set the fixture to slave mode for use in either the auto
program or music control program modes
• DMX control mode -This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation® Show Designer 2.
11.1 Stand-Alone Operation (Internal Program or Sound Active): This mode
allows a single fixture to run to the built-in programs with or without sound. Only
use this mode when running a single fixture, or when running several fixtures as
individuals.
" Mount your fixture in a secure and stable manner.
" For functionality without sound control: Access the “Function” menu
and select the “Auto Program” function, this will give you access to the
“Auto Program” submenu. See page 21 for the menu breakdown. Once
in the “Auto Program” submenu select “Alone”
" For functionality that chases to sound: Access the “Function” menu
and select the “Music Control” function, this will give you access to the
“Music Control” submenu. See page 21 for the menu breakdown. Once
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 57 58

Comments to this Manuals

No comments