Elation 15R Specifications download pdf (Page 29)

Platinum Beam 15R™

©Elation Professional® Los Angeles Ca. 90040 www.ElationLighting.com

temperatures below 90° C are not critical. Temperatures above 90° C should lead to the lamp

being switched off. Please note that the outside temperature should not exceed 45° C.

9.4 Personality:

9.4.1 Status setting

Address via DMX - This function allows the DMX address to remotely be adjusted from a

DMX console. This setting requires special settings for both the controller and the fixture.

RDMX is on by default. For operational instructions please see Section 10/Page 35 of

this manual “Remote DMX addressing.”

No DMX Status – This function dictates how the fixture will function if it looses DMX

signal during normal operation. The default function is set to hold, in which the fixture will

lock into the last DMX signal it received and remain in that position until it is turned off or

begins receiving a new DMX signal. If the fixture is turned on without any DMX signal,

the fixture will automatically go in to sound-active mode. Available settings are: “Close”

– Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto” – Fixture

will go into stand-alone mode, running the built-in program. “Music” – The fixture will go

into sound-active mode.

Pan Reverse - This function allows you to invert all pan movements. Use the Up and

Down buttons to turn this function On or Off. Press the Enter button to accept the change

or the Mode button to cancel and return to the main menu. This function is “OFF” by

default.

Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and Down

buttons to turn this function On or Off. Press the Enter button to accept the change or the

Mode button to cancel and return to the main menu. This function is “OFF” by default.

Pan Degree – This function changes the maximum Pan resolution from either 540˚ or

630˚. The default function is 540˚. 630˚ operation allows for greater coverage, but slower

pan movement.

Feedback – This function turns the feedback correction on or off. This function is set to

“ON” as default. This function allows for automatic pan and tilt correction in the event

either one disrupted during normal operation.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

No comments

Elation 15R Specifications Page 29