Elation DR-512 Specifications download pdf (Page 7)

Elation Professional - www.elationlighting.com - Page 7

5 LCD Display

I01 MANUAL _

Sh01 00:00:00

• Press “PLAY”, “_” will appear in the top right corner of the LCD;

Press “PAUSE”, “

ll” will appear in the top right corner of the LCD;

Press “STOP”, and “_” will appear in the top right corner of the LCD.

• The characters in the middle of the first line in the LCD stand for the MANUAL,

AUTOSTART, DMX MON, DMX TRIGGER, PRG MODE or SETUP mode.

• In the first display line, “

I” means “internal”, while “E” means “external”, and the

following “01~33” means one of the sequence numbers.

• In the second display line, “

Sh01” means one of the Sequence names. This can be

changed by pressing the “Enter” button under PROGRAM mode only. But on the

other hand, the StUp (START UP) and StDN (SHUTDOWN) can not be changed.

• The time displays in the bottom right corner of the LCD. When the LCD shows

“__:_:__” (Hour, Minute, Second), this means the time of internal storage.

While “__:__:__:__” (Hour, Minute, Second, Frame), this means the

SMPTE time. The time-display pattern can be switched through “Sys Time” under

SETUP mode.

6 Operation modes

6.1 MANUAL mode

• This mode allows the most freedom to operate this unit. The user can select any

one of the sequences at any time to run, pause or stop the current sequence. The

user can also start the operating at STARTUP and SHUTDOWN.

• For internal storage, select one of the

I01-I04 sequences and press the PLAY

button to run the sequence. This sequence will run continuously unless you press

the PAUSE or STOP button.

• For internal storage, press the STARTUP button, then the STARTUP sequence will

run once, and other sequences will run continuously.

• When the SHUTDOWN button is pressed, the SHUTDOWN sequence will run one

time, and other the sequences will be stopped.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Elation DR-512 Specifications Page 7