Elation SP4LED User Manual download pdf (Page 43)

www.elationlighting.com!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!RQ!!!!!!!!!!!!!!!!!!#!$%&'!(#)!**+!,-./!012314!567

Color-Wheel Error:

The color wheel is not located in the default position after start-up or after a reset command.

This message will appear after a fixture reset if the color wheel’s magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure

(defective motor or a defective motor IC drive on the main PCB).

Rotating Gobo-Wheel Error:

The gobo-wheel is not located in the default position after start-up or after a reset command.

This message will appear after a fixture reset if the gobo wheel’s magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure

(defective motor or a defective motor IC drive on the main PCB).

Rotating Gobo Indexing Error:

The gobo is not located in the default position after start-up or after a reset command. This

message will appear after a fixture reset if the gobo positioning magnetic-indexing circuit

malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure

(defective motor or a defective motor IC drive on the main PCB).

Prism-Wheel Error

This message will appear after the reset of the fixture and if the magnetic-indexing circuit

malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its

driver circuit on the main PCB). The Prism wheel is not located in the default position after

the reset.

Focus-Error

This message will appear after the reset of the fixture and if the magnetic indexing circuit

malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its

driver circuit on the main PCB). The focus motor is not located in the default position after

the reset.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

No comments

Elation SP4LED User Manual Page 43