Elation Power Wash 575E Specifications download pdf (Page 29)

Design Wash 575E™

©Elation Professional® 29 Design Wash 575E™

8.8 EDIT PROGRAM:

8.8.1 Select program – This function allows the user to select one of ten of the user

defined built-in programs. This program is then accessed in “Function Mode”

under “Program Run.”

8.8.2 Edit program – This function allows the user to edit the built-in programs.

8.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes

that are stored in the user defined built-in programs that are accessed in the

previous step.

8.8.4 Rec Controller - The Design Wash 575E features an integrated DMX recorder

by pre-programmed scenes can be transmitted to the fixture via any standard

DMX controller. This function allows those scenes to be stored in to the fixture’s

built-in memory and then subsequently used to create user defined programs.

9. OPERATION

Operating Modes: The Design Wash 575E™ can operate in three different modes. This

next section will detail the differences in the operating modes.

• Stand-alone mode - The fixture will react to sound, chasing through the built-in programs.

• Master/Slave mode - You can daisy chain up to 16 fixtures together to get a synchronized

light show without the need of an external controller. The fixtures will react to sound chasing

to synchronized light show.

• DMX control mode - This function will allow you to control each individual fixtures traits

with a standard DMX-512 controller such as the Elation® Show Designer 2.

9.1 Universal DMX Control: This function allows you to use a universal DMX-512

controller such as the Elation® Show Designer 2™ or Elation® Show Designer 3™ to

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

No comments

Elation Power Wash 575E Specifications Page 29